DVD-3214

3G/HD/SD-SDI/ASI Video Distribution Amplifier with Bypass Relay (dual 1 to 4 or single 1 to 8)

DVD-3214 is a 3G/HD/SD-SDI/ASI video distribution amplifier which can be operated as single and dual channel.

In the event of a power failure, the input signal is transferred to the output by a bypass relay which is provided for each input.

Re-clocker for jitter removal and equalizer for cable loss compensation are the main capabilities of the DVD-3214. All adjustments and controls can be applied directly by onboard DIP switches and web interface remote control.

For the 1 to 8 mode, the input1 is connected to all eight outputs and in the event of input signal problem, all the outputs would be disconnected. For the 2 to 4 mode, the input1 is connected to the first four outputs and the input2 is connected to the second four outputs. In this mode, two options of “Change Over” and “Recover” are considered. When the “Change Over” is enabled, if one of the input signals is lost, the related outputs are supported by the other input. In this case, when the input is retrieved, the signal won’t be connected to its outputs. But if the “Recover” is enabled too, the signal automatically will be switched back to its outputs again.

The web interface remote control and LED indicators on the front edge of the card, inform the user about operational status of the module.

 

Download PDF

Description

  • Supports SMPTE 424M, SMPTE 259M, SMPTE 292M standards
  • Web interface remote control
  • Supports SNMP protocol
  • Standard detection of the input signal
  • Re-Clocking for jitter removal
  • Cable loss compensation
  • Remote update
  • Mountable on 3 RU frame (SRM-0655)
  • Configurable as 2× (1 to 4) and 1× (1 to 8)
  • Status LED indicators

Ordering Information

Product Description
DVD-3214 3G/HD/SD-SDI Video Distribution Amplifier with Bypass Relay (dual 1 to 4 / single 1 to 8)